Autocar confidential: Citroen says comfort is crucial, Fiat won’t downsize and more

As we flick through our notes this week, we learn why Fiat won’t make a Renault Twizy rival, why the new Evoque will attract more buyers than its predecessor, and more.  Fiat stays full-sized Despite its expertise in small cars, Fiat will not make a quadricycle-based city car such as the Renault Twizy or Seat Minimo (pictured), according to boss Olivier François. “They answer a need because 16-year-olds can drive them,” he said, “but they won’t help (EU) CO2 (fleet) targets as quadricycles aren’t counted. Evoque has room for improvement Some 60% OF Evoque customers are conquests from other brands, but Land Rover marketing boss Anthony Bradbury reckons that figure will rise even higher with the second-generation version. Referencing the old model’s shortage of space, he said: “That was one reason the car was rejected by some, so now that’s been addressed, this gives us another chance in conquest audience.”  Citroen’s lounging around Citroen boss Linda Jackson believes the impending rise of autonomous systems will reward the firm’s key focus on comfort. “There aren’t many manufacturers talking primarily about comfort, and if we’re going to be spending more time in our cars, it has to be friendly and comfortable,” she
Origin: Autocar confidential: Citroen says comfort is crucial, Fiat won’t downsize and more

Arrivederci: the Fiat 500 will no longer be sold in Canada

2019 Fiat 500 AbarthDerek McNaughton / Driving The writers at Driving regret to announce the death of Fiat 500, aged 108 months in this country. It is survived by cousins 500L and 500X, plus distant relative 124 Spider.Fans of the diminutive Fiat 500 hatchback will need to get themselves in gear if they want one before theyre gone for good. All signs point to the little 500, a car which served as the beachhead for Fiats return to this country, not returning to the Canadian market in 2020.Absent from Fiat Canadas lineup description for the upcoming model year it lists only the above-mentioned 500 variants and the 124 convertible customers will have to choose from remaining dealer stock once new copies of the car stop being shipped to Canada.The 500 lineup was consolidated greatly in recent years. For 2019, Pop and Lounge trims came equipped with the 1.4-litre MultiAir turbocharged engine, a 135-horsepower mill once reserved for the standalone Turbo model. The roary Abarth made 160 horsepower and gloriously naughty sounds while plastering a permanent grin on the face of its driver.This decision effectively chops the number of vehicles available in Fiat showrooms by 25 per cent. In June of this year, the brand sold just 31 cars in this country, 10 of which were 500s of various trims. Through the first half of 2019, Fiat has moved 209 cars, down from 368 cars during the same time-frame one year ago. The 500 reliably makes up about one-third of those numbers. Fiat dealers will be left hucking the Renegade-related 500X; the Mazda-related 124 Spider; and the weirdo-related 500L. The former, assembled in Italy and now the brands volume leader, is presently offered solely with a 1.3-litre turbo making 177 horsepower, by the way. All-wheel-drive remains an option. Serbian-built 500L models soldier on with the 1.4-litre mill.Will the 500 return to these shores? Fiat has left the door open by refusing to quash rumours that it may come back in a different shape as an electric vehicle. The company also marketed the all-electric 500e south of the border, a car which will also vanish after this model
Origin: Arrivederci: the Fiat 500 will no longer be sold in Canada

Autocar confidential: Byton thanks Tesla, Fiat pumps out more Pandas, and more

As we chat to the motoring industry’s bigwigs this week, we hear how Tesla made life easier for Byton, how Audi will differentiate between each of its SUVs and more.  Fiat Pandas to market demand It may be ageing but sales of the Fiat Panda have risen substantially this year, thanks to the popular new City Cross model. The high-riding, snappily dressed version looks like a four-wheel drive (a version you can still buy) but isn’t. Volkswagen: diesel’s not dead… yet Volkswagen sales and marketing boss Jürgen Stackmann says the brand isn’t giving up on diesel yet. “There is nowhere the date (we give up on diesel) is written,” he said. “We believe diesel is great for certain vehicle types and long-distance drives, with unparalleled efficiency. We’re the only manufacturer that has actually grown its diesel mix. We’ll give it a strong shot for EU7.” Ingolstadt draws up a plan Audi’s ever-growing SUV range makes varying the design of each model vital in order to identify its place in the line-up, according to Jakob Hirzel, exterior design leader of the recently facelifted Q7. “It’s about character, and identifying where it makes sense to make them different,” he said. “It’s a much bigger line-up now, so it’s a challenge to make sure they all make sense.”  Byton boards the Tesla train Tesla’s early success helped lay the groundwork for other electric car makers, according to Byton CEO Carsten Breitfeld. “They did a great job to build up this premium electric brand. They changed the perceptions of people,” he said. Hiring designers and engineers for the upcoming M-Byte SUV was that much easier because “no one is questioning the potential of electric cars any more. No one would say an electric car is something
Origin: Autocar confidential: Byton thanks Tesla, Fiat pumps out more Pandas, and more

Fiat Chrysler begins fix for vibration issue on Jeeps

A 2015 Jeep Wrangler Unlimited. Fiat Chrysler Automobiles has started replacing a steering component in newer Jeep Wranglers in the wake of a slew of complaints from owners over what one lawsuit calls a “death wobble.”The new steering damper the automaker is fitting to the SUV has a design feature that affords more efficient function, FCA spokesperson Eric Mayne told Automotive News on Monday.Owners of 2018 and 2019 model year Wranglers would be notified beginning August 9, and FCA is still determining the number of vehicles affected, Mayne said.A lawsuit filed in June alleges a defectively designed damping system can cause some Wranglers to experience a death wobble, or a violent shaking at highway speeds. This rarely occurring phenomenon is not peculiar to any one vehicle and is not a safety issue, FCA said in a statement. FCA US strongly objects to any insinuation otherwise.Automotive News notes the lawsuit says steering dampers are a band-aid fix that will only temporarily conceal the problem.The automaker noted the issue comes up most frequently during cold
Origin: Fiat Chrysler begins fix for vibration issue on Jeeps

Fiat mechanic leaves behind literally tons of vehicles for sale

Have you ever dreamed of owning 75 Fiats? No? Does that literally sound like the definition of a nightmare to you? Well, luckily enough for you, this yard full of 75 Fiats is selling them off one by one. Relieved?Unfortunately, the cars are coming up for sale due to the death of the owner of the shop theyre parked behind.Tom Dotter of Denver, Colorado was a mechanic who specialized in Fiats; he passed away in May due to a heart attack, followed by a stroke.Thats why Dotters surviving family is holding the Great Fiat Yard Sale, which lets you show up, take a look at the collection and potentially walk (or trailer) away with a classic Fiat project.According to the Everything Fiat 124 page, the vehicles are being sold at US$250 apiece. Some have titles, some dont, some of them already have owners that are trying to be reached, like all the Lancia Scorpions drat!Most of the vehicles are 124 Spyders, but there are also a handful of 128s, as well as 131s and Bravas. Some 850 Coupes and Spyders are also peppered among the metal, along with X1/9s. Theres even a couple Yugos and Subaru XTs in there, just to keep things interesting (as if a yard full of Fiats wasnt already).It almost goes without saying, but none of these cars are in perfect shape all will require work, but for somebody whos always wanted an old Fiat, this is the time to buy. The owners would like to see every car go to a new home, whether its being restored, or raced, or even enjoyed
Origin: Fiat mechanic leaves behind literally tons of vehicles for sale

All-new electric Fiat 500 spied testing ahead of 2020 reveal

An all-new electric Fiat 500 city car, the 500e, has been spied testing in California, ahead of its launch at the Geneva motor show in 2020. The sighting of the camouflaged prototype comes just a week after Fiat said it would invest 700 million Euros on the electric city car, to include a new production line in Mirafiori, Italy. Fiat hopes to produce 80,000 examples of the new 500e.  The car will be sold alongside the existing 500, which will continue to be powered by conventional petrol engines as well as receiving styling and technical updates. The all-new electric 500 will sit on a bespoke electric car platform, according to Fiat boss Olivier Francois, with the same platform potentially earmarked for use if the the new Panda-inspired Centoventi concept makes production. The electric 500 will be a key part of Fiat’s transformation in Europe into a brand focusing on small electrified city cars. “The car will stay true to everything you know about the 500, but will be entirely new,” said Francois. “Under the skin it will be radically different, but otherwise you will recognise the size and proportions. “But it is a big statement, starting our electric path with the 500. We are doing it with that car for reasons of pricing. It is clear that we cannot sell an electric 500 for the same entry price of today’s 500, but what’s clear is that more than half of our 500 customers today do not buy entry-level models. In fact, for them a 24,000 euro price is normal today. “If you look at our electric competition, they are priced around 32,000 euros. The leap then from 24,000 to 32,000 is not so much, especially if you factor in government grants for electric vehicles. Francois refused to be drawn on whether the electric 500 could be rear-wheel drive like the original, but said he would be open to the idea. He also said that an electric Abarth model could hold appeal. The electric car platform that the new 500 will sit on will be FCA Group developed. Francois said he would personally be open to sharing the technology with partners – the 500 platform has previously been shared with the Ford Ka, for instance,  but he stressed that any such decision would have to be made at a Group level. Fiat also confirmed the new 500 will be joined by a 500 Giardiniera estate, although the firm didn’t say if that would also appear at next year’s Geneva show. Ahead of the 500e arriving, a mild hybrid variant of the 500 is due to launch later this year. The aim is to consolidate the brand’s dominance of the city car segment – the 500 and Panda hold a third of this market – while developing technologies that allow these models to satisfy emission regulations.  This focus also means other, less successful Fiat models are expected to axed. These include the Punto – axed after a 13-year production run – and, while unconfirmed, the Tipo.  The 500 Giardiniera, which references the tiny wagon of 1960, will offer the best space efficiency in its class, says Fiat, and “unmistakable design”. It too will get electric and mild hybrid variants. The 500’s new platform architecture can also cope with a mild hybrid system. That unit consists of a belt driven, 12V starter-generator, although little detail has been provided on the electric drivetrain to be used in the 500. Lower-emissions petrol engines will also be offered in the 500 and Panda.  Francois conceded that the decision to develop the electric cars was driven “both by the desire to create a profitable electric car for our future, and to ensure we avoid the pressures of potential fines if we don’t hit CO2 targets.” Given the limited space for batteries and the 500’s urban appeal, range of the 500e is likely to be less than EVs such as the Nissan Leaf, which offers around 250 miles. The 500e will be a rival to a growing number of small EVs – Mini’s first series-production electric car is due in 2019, at the same time as the Honda Urban EV.  The 500e will be one of four electric powertrains offered by FCA. It will sit use a ‘City Car’ powertrain, while a ‘Mainstream’ powertrain will be launched in the Jeep Grand Commander. A ‘Performance’ powertrain will feature in the 2020 Maserati Alfieri and a ‘Premium’ EV powertrain will power the 2022 Maserati Quattroporte.  The push for electrification comes amid Fiat Chrysler’s abandonment of diesel; by 2022, there will be no diesel options in the FCA catalogue. These will be replaced by numerous hybrids, both full and plug-in, the first of which will be the new Jeep Grand Cherokee, landing in 2020.  The production capacity released by the deletion of the Punto and other unspecified Fiat models – such as Tipo – will be used to build more Alfa Romeos and Maseratis, whose premium prices can withstand the electrification costs. Some Italian capacity will be used to build some plug-in hybrid models, including certain Jeeps for global sale. Additional reporting by Jim Holder and Richard
Origin: All-new electric Fiat 500 spied testing ahead of 2020 reveal

Fiat investing in new plant assembly line to build electric 500

Robots manufactured by Comau are pictured on the assembly line of the Fiat 500 BVE, the first of its kind in Europe, during its inauguration at the Fiat Chrysler Automobiles (FCA) Mirafiori plant in Turin on July 11, 2019.Miguel Medina / Getty Fiat announced mid-July it was investing US$788 million into its Mirafiori plant in Turin, Italy in order to build a battery electric (BEV) version of its 500 city car.The first robots on the new assembly line were installed July 11 at a ceremony that saw the automaker announce the plants production target of some 80,000 BEVs per year.Production of these next-gen electrics will begin in the second quarter of 2020, said Pietro Gorlier, FCAs chief operating officer for Europe, Middle East and Africa, and the production target could later be expanded.FCA plans to invest a total of US$5.6 billion in Italian production by
Origin: Fiat investing in new plant assembly line to build electric 500

Fiat Chrysler faces lawsuit over Jeep steering wobble

2018 Jeep Wrangler RubiconJeep Fiat Chrysler’s lawyers have been having a good year, financially speaking. The latest overtime they’re taking on comes thanks to a New Jersey resident who’s behind a new class-action lawsuit recently filed against the international automaker. The suit claims Fiat Chrysler Automobiles defectively designed and/or manufactured front axle and damping system,” which, when triggered, can cause the steering of Jeep Wranglers made from 2015 to 2018 to shake while travelling over certain speeds or terrain, and that it didn’t warn drivers about the flaw. The Wrangler’s solid front axle allegedly can’t handle the road the same way the suspension can, occasionally causing the front axle and steering to fall out of line and begin oscillating at highway speeds, reports the Detroit Free Press. The automaker acknowledges the issue exists, but claims it’s due to faulty aftermarket equipment, damaged steering components and/or improper tire pressure, not bad building. No fatalities or injuries have been reported, but the suit takes aim at the fact FCA has neglected to declare the issue a safety hazard, and doesn’t warn potential buyers of the problem. “Rather than address it – or disclose its possibility and/or warn drivers at the point of sale – FCA simply claims in a news article that the Death Wobble’ is not a safety issue’ and that it can happen with any vehicle that has a solid front axle (rather than an independent front suspension), such as the Wrangler,’” reads the lawsuit.  The class-action litigation is seeking to force FCA to offer a buy-back program to affected drivers, along with punitive damages.
Origin: Fiat Chrysler faces lawsuit over Jeep steering wobble

Fiat Chrysler withdraws Renault merger offer

Fiat Chrysler Automobiles (FCA) has withdrawn its offer of a ’50/50 merger’ with Renault. If it had gone ahead the deal would have created one of the world’s biggest car firms, but a FCA statement said “it has become clear that the political conditions in France do not currently exist for such a combination to proceed.” The decision to withdraw the offer was taken at a meeting of the FCA board. That comment is a direct reference to the fact that – after more than six hours of talks yesterday – Renault’s board again delayed a decision on whether to engage with the proposal. The French government, Renault’s largest shareholder, had requested the delay. In a statement Renault said it was “unable to take a decision due to the request expressed by the representative of the French state to postpone the vote to a later council.” FCA had claimed that combined annual revenues from the merger would be around £150bn, with an operating profit of more than £8.8bn a year. It had also claimed thato plant closures would be considered as a result, with output of around 8.7m cars a year. In its statement withdrawing the offer, FCA said that it “remains firmly convinced of the compelling, transformational rationale of a proposal that has been widely appreciated since it was submitted, the structure and terms of which were carefully balanced to deliver substantial benefits to all parties.” FCA offered its thanks to Renault, along with the French firm’s Alliance partners Nissan and Mitsubishi, for their “constructive engagement” over the proposal. Analysts had broadly welcomed the possibility of the tie-up between the two firms, with FCA’s strength in North America, through its Jeep and Ram brands, giving Renault an opening in that market, and FCA benefitting from Renault and Nissan’s experience with electrified cars, where it is lagging. FCA also includes the Fiat, Alfa Romeo and Maserati brands. It is not clear if the withdrawal of its offer spells the end of the potential alliance, or if FCA will talk to other partners instead. Previously FCA is also understood to have also held talks with the PSA Group, which comprises Peugeot, DS, Citroen and Vauxhall/Opel, over a partnership. PSA boss Carlos Tavares is known to be keen to grow his firm with acquisitions or partnerships, and has been strongly linked to a deal with Jaguar Land Rover. FCA boss Mike Manley is also known to be keen on a partnership, telling reporters at the Geneva motor show that he was open to cooperation with other car firms, “whether it’s partnerships, joint ventures or deeper levels of equity cooperation that makes sense for us and whoever that
Origin: Fiat Chrysler withdraws Renault merger offer

Fiat Chrysler withdraws 50/50 merger proposal with Renault

In this file photo taken on August 21, 2017, a car dealer in Turin, Italy, shows the logos of Jeep, Fiat, Lancia and Alfa Romeo automobile company, brands of Fiat Chrysler Automobiles (FCA).Marco Bertorello / Getty Images Fiat Chrysler Automobiles (FCA) has withdrawn its merger offer with Renault, not long after reaching a tentative agreement with France on the terms of the proposed offer. Renault issued a statement that it had been reviewing the potential 50/50 merger “with interest” but was unable to reach a decision because representatives of the French State – which owns 15 per cent of Renault – had asked for the automaker’s vote to be postponed to a later meeting. This request followed two consecutive days of meetings by Renault’s board of directors. In turn, FCA issued a statement saying that “it has become clear that the political conditions in France do not currently exist for such a combination to proceed successfully.” The American automaker thanked the heads of Renault, along with its Alliance partners Nissan and Mitsubishi. FCA proposed the merger with Renault on May 27. It would have created the world’s third-largest automaker, behind Volkswagen and Toyota, and was valued at US$35 billion. The Wall Street Journal reported that FCA had pulled the merger offer after Nissan refused to support the deal. The paper also said it was Nissan’s stance that caused the French government to ask for postponement of the vote. Reuters reported that Nissan’s CEO, Hiroto Saikawa, said that the FCA-Renault merger “would require a fundamental review” of his company’s relationship in the Renault-Nissan-Mitsubishi Alliance. The connection between Nissan and Renault has already been strained by the arrest of CEO Carlos Ghosn. Prior to FCA’s withdrawal, the merger proposal was expected to pass without any issues, although concerns about job losses were raised by European governments. The United Auto Workers Union (UAW) said in a statement that, “As with any merger of companies, the UAW is first and foremost concerned how this will impact our members. FCA leadership has stated to us that this action will not result in any closure of our represented locations.” Following the initial announcement of the proposal, Mike Manley, CEO of FCA, sold US$3.5 million worth of his FCA shares. In other news, U.S. sales chief Reid Bigland has sued the automaker in a “whistleblower” lawsuit, claiming the company punished him for speaking to the federal government about how it reported its
Origin: Fiat Chrysler withdraws 50/50 merger proposal with Renault