Hot diesel saloon showdown: Audi vs Alpina vs Mercedes

Diesel. Thought it was dead, didn’t you? And maybe it is. Sales have been down in the UK for the past 26 consecutive months and, anecdotally, more of the new cars arriving at Autocar road test headquarters now read 95RON on their filler caps; 98RON if we’re lucky. But try telling this to Audi.  Audi spent millions (billions?) winning Le Mans time and again with smooth and bizarrely quiet TDI thrust, and now it’s fitting sophisticated diesel engines to its aspirational road cars. Models such as the S6 saloon and Avant, which only two generations ago used a normally aspirated 5.2-litre petrol V10 shared with Lamborghini. The S7 Sportback didn’t exist in the glory days of Audi’s supercar-engined but otherwise amusingly low-flying exec saloons, but it’s of the same ilk as the S6 and fundamentally they’re the same machine. It’s why the new S7 Sportback now also gets nothing more exotic, enticing or enthralling than a medium-sized V6 diesel.  Madness or masterstroke? Anyone craving unleaded performance will soon have the option of the RS7 – which packs around 600bhp and is faster and firmer than ever before – so perhaps the S7 can thrive as a sub-sonic diesel express. And yet even if you ditch the exciting engines, Audi’s S moniker still needs to mean something to the person paying over £70,000 after options.  Which is why today we’re putting the S7 up against Mercedes’ aristocratic CLS 400d 4Matic and the lesser-spotted but dynamically very well-sorted Alpina D5 S. These cars have different identities but a shared philosophy: namely, that in the real world, big diesel four-doors can be almost as quick and just as desirable as their pumped-up petrol counterparts, only more refined and much more economical. In terms of crucial ‘fitness for purpose’, their case is stronger more of the time than for the 600bhp car that flirts with single-digit fuel economy the moment you explore its potential.  At £68,000, the S7 Sportback is by £6000 the most expensive car here, but it’s an otherwise cosy clique: six-cylinder engines, four-wheel drive, easily more than 300bhp and, in the case of all three, precisely 516lb ft served up ‘from the basement’, as one nameless Autocar tester once put it. The Audi uses a dual-clutch gearbox whereas the others have automatics, and it’s the only car here with rear-wheel steering, although that is an option on the Alpina.  As you notice straight away in the metal, the Audi is also the longest, widest and lowest car here – marginally more so than the Mercedes, with the more conventionally proportioned BMW 5 Series-based Alpina a little way off either. But none stands out as a design marvel. The inoffensive CLS underplays its hand as a sophisticated ‘four-door coupé’ whereas the S7 Sportback chokes a good degree of its natural elegance with an enormous grille and odd details such as the halfhearted diffuser. Meanwhile, the D5 S sports Alpina’s usual aerodynamic fastenings and, unlike the Audi, its four exhaust tips are genuine. It looks the most serious, although you can nevertheless see why someone might go for the sleeker cars. Their level of presence marks them out as something unusual and quite special.  We should now talk about the Audi’s new 3.0-litre V6 TDI. The block is ordinary in the sense that you’ll find it on regular models such as the A7 50 TDI but the pistons, conrods and crankshaft are all upgraded. There’s not only a variable-geometry turbocharger fed by exhaust gases but also an intake-side electric compressor that doesn’t require gas flow. It spools to 70,000rpm in an instant and, in theory, covers off the old-school turbocharger’s more laggy response. Beyond 1650rpm, it’s an ornament, being primarily designed to give sharp step-off and acceleration from low engine speeds, and can react so quickly because it’s driven by a 48V system whose lithium ion battery resides under the boot floor. That’s right. Never mind a big-capacity V10: the medium-rare Audi four-door of 2019 is a diesel mild hybrid. There’s also a battery alternator/starter connected to the crankshaft. It can scavenge electrical energy during deceleration and get the V6 going again after periods of engine-off coasting. Fit for purpose in the real world? Almost 35mpg combined and 344bhp suggest that’s very much the case.  The first stint in this test takes us straight into an area where these cars need to excel: motorway driving. Refinement starts with comfort and here it’s difficult to look past the Mercedes, whose leather chairs have the sort of deep, low-set curvature that makes it feel by far the most GT-esque. The leather steering rim is wide, thin and firm – old-fashioned but good to hold.  The Alpina is also supremely comfortable, feeling more materially rich than either of the others and with switchgear that’s simpler and more elegant. What you don’t get is the sensation that you’re sitting in a car with a particularly sporting persona, which, of course, you’re not. Alpina
Origin: Hot diesel saloon showdown: Audi vs Alpina vs Mercedes

2020 Jaguar XJ: electric-only saloon teased at Frankfurt

Jaguar has given a sneak peek of its next-generation electric-only XJ flagship saloon with a teaser image shown at the Frankfurt motor show. The brief image of the new XJ’s rear was shown during a video played at the firm’s press conference, where sister firm Land Rover revealed the new Defender.  It shows a classic saloon-style rear end, with thin rear lights that feed into a light strip running the full width of the bootlid. The model also features both the Jaguar logo and the company’s name spelt out. Jaguar design director Julian Thomson told Autocar the new XJ would look different from a traditional executive saloon. “Even saying F-segment long-wheelbase luxury saloon sounds awful, we don’t want to do that,” he said at the Frankfurt show. “We want to do a car that explores the best of Jaguar. “We want to make it a beautiful car, with an engaging drive, a luxurious interior – we’ll do each of these our own way. We won’t be putting a tape measure on rivals to just match, match, match. “We want to present something that challenges the norm, offer an alternative that makes it better and more engaging on all levels to own and to drive, that’s what we’re all about, the love of the car.” Thomson said that the next XJ’s design would “not be conventional”, adding: “I don’t think you can be. You don’t stick a poster on a wall of a German long wheelbase luxury saloon I don’t think. Jag’s positioning of cars is to lust after, to want and desire. We can absolutely do that and it’s a fabulous looking thing, for sure.” Thomson noted the packing of an EV would offer increased cabin space, but said that also presented challenges to designers. He added: “We’re learning how to do the aesthetic. They’re heavier, need more structures for crash. The mass means you have normal building blocks in different places. These are things we’re learning. “We feel we’ve had an advantage with I-Pace. We’ve learned a lot from it, not just with the technology but what we can do with space. EVs are serene and have a sense of calm, more of a spiritual quality. It’s as close as you can get to doing yoga in a car. We’ll bring that into XJ, bring a sense of cabin ambience that’s calm and refreshing.” The firm recently confirmed that the XJ will be relaunched next year as an electric model and will be built at its Castle Bromwich plant. Jaguar announced the news on the day that production of the current XJ ends at the factory. The electric XJ will be the first electric model produced at the plant, but Jaguar Land Rover said it plans to manufacture “a range of new electrified vehicles” at the facility. JLR’s current electrified models, the Range Rover and Range Rover Sport plug-in hybrids, are built at its Solihull plant, while the electric Jaguar I-Pace is produced by contract manufacturer Magna Steyr in Graz, Austria. Autocar first reported that the next-generation XJ would go electric in 2015, but this is the first time that the Coventry-based firm has confirmed the bold move for its largest saloon.   It said the new XJ will “build on the characteristics synonymous with its predecessors: beautiful design, intelligent performance and revered luxury”, adding that it will be built by the same “expert team of designers and product development specialists responsible for delivering” the I-Pace. Today’s announcement builds on JLR’s plan, confirmed earlier this year, to bring its battery and Electric Drive Unit assembly to the Midlands. The Battery Assembly Centre at Hams Hall, opening in 2020, will be capable of producing 150,000 units annually, while the Wolverhampton Engine Manufacturing Centre (EMC) is the home of JLR’s global EDU production. JLR, which announced 4500 job losses earlier this year, said the news “safeguards several thousand jobs in the UK”. Work on Castle Bromwich will begin later this month in order to allow it to support JLR’s next-generation Modular Longitudinal Architecture (MLA), which can house diesel and petrol vehicles alongside electric and hybrid models.  JLR chief executive Ralf Speth said: “The future of mobility is electric and, as a visionary British company, we are committed to making our next generation of zero-emissions vehicles in the UK. “We are co-locating our electric vehicle manufacture, Electronic Drive Units and battery assembly to create a powerhouse of electrification in the Midlands.” Speth, when asked about the scale of the investment, commented: “When you get into new architectures like we have, you’re into the billions, spread over years to come.” JLR said that while the expansion of its electrified line-up will see customers offered a greater choice, “increased consumer take-up remains a challenge”.  It called on government and industry to work together to bring a Tesla-like giga-scale battery production facility to the UK to put the country at the “leading edge of electric mobility”. Speth said: “Convenience and affordability are the two key enablers to drive the
Origin: 2020 Jaguar XJ: electric-only saloon teased at Frankfurt

Bentley recreates long-lost 1939 Corniche performance saloon

Mulliner, Bentley’s in-house bespoke division, has faithfully recreated the company’s 1939 Corniche performance saloon, 80 years after the sole example was destroyed.  The Corniche, named in reference to the French coastal roads on which it was designed to be driven, was built in 1939 as a high-performance reworking of Bentley’s pivotal MKV luxury saloon. Key upgrades over the MKV included lightweight steel body panels, a bespoke overdrive-equipped gearbox and modifications to the iconic 4 1/4-litre straight-six engine.  Following successful speed trials at Brooklands, where it surpassed 100mph, the Corniche was damaged in an accident on French roads, and subsequently destroyed completely during a German bombing raid on the Dieppe port where it was being stored.  Despite the loss of the only Corniche produced, a stockpile of parts for future models remained, and Bentley has been able to use original components for the continuation model.  The project has been ongoing since 2001, when ex-Bentley director Ken Lea and a team of enthusiasts set out to create a Corniche using original parts and plans. Bentley gave financial support to the restoration in 2008, before bringing it in-house around 18 months ago at new CEO Adrian Hallmark’s request.  Mulliner has been chiefly responsible for the work carried out since, although Bentley claims many employees from other departments devoted their spare time to rebuilding the Corniche.  Bentley believes the underlying chassis to be an original unit from 1939, but the ash frame, interior and body have been built from scratch.  The body panels were finished by the same team responsible for hand-forming the current Mulsanne’s bodywork, and are based on original blueprints donated by the family of the Corniche’s designer, George Paulin.  The interior is trimmed throughout in period-correct leather and cloth, while the wooden window surrounds have been heat-formed over a number of hours in a purpose-built steam booth.  It took a team of metalworkers three months to recreate the Corniche’s prominent front grille, each slat of which was digitally designed to enhance airflow.  As with the original, the Corniche is powered by a MKV-derived 4 1/4-litre engine with higher-compression pistons, larger carburettors and a reconfigured inlet manifold.  A Bentley spokesman said the Corniche’s resurrection is “proof that we have the skill to do restorations of this complexity”, hinting that more such projects could follow.  Bentley is marking its centenary in 2019, and has unveiled a number of limited-run special editions and organised several commemorative events as part of the celebrations.  The rebuilt Corniche will make its public debut at Blenheim Palace’s Salon Privé in September, where it will be on display alongside heritage models such as the Birkin Blower and WO Bentley’s 8.0-litre
Origin: Bentley recreates long-lost 1939 Corniche performance saloon

New Bentley Flying Spur: 207mph luxury sports saloon on show at Goodwood

The third-generation Bentley Flying Spur will represent a “quantum leap in technology, performance and innovation” over its predecessor, according to the Crewe-based maker.  The goal for the model – which follows the Bentley Bentayga and Continental GT in the sales rankings and makes its public debut at the 2019 Goodwood Festival of Speed – is to offer sports saloon agility paired with limousine refinement so that it caters to both drivers and those being chauffeured. The latter is a crucial selling point for the Flying Spur in China, which is the largest market for the model alongside the US.  Bentley claims that the new Flying Spur “owes only its name to its predecessor” – alluding to its new chassis, suspension, W12 engine and eight-speed dual-clutch automatic gearbox. Much of the new Flying Spur’s set-up and componentry is shared with the Continental GT, launched last year.  However, despite the Flying Spur and Continental’s identical underpinnings, including the MSB platform that is also shared with Porsche’s Panamera, Bentley has sought to differentiate the two cars not only through the difference in body shape but also a number of finer design details both inside and out.  The Flying Spur will launch with Bentley’s familiar range-topping twin-turbocharged W12 engine, reworked for this generation. The 6.0-litre unit produces 626bhp and 664lb ft of torque, accelerating the car from 0-60mph in 3.7sec, 0.7sec faster than its predecessor. The top speed is 207mph. It is mated to an eight-speed dual-clutch transmission promised to deliver “smooth and refined acceleration, quicker gearshifts and improved fuel economy”.  The engine combines high-pressure and low-pressure fuel injection, intended to maximise refinement, lower particulate emissions and optimise power and torque delivery. The new model reaches a peak torque of 664lb ft at 1350rpm, compared with the previous generation’s 590lb ft at 2000rpm. The unit also uses a variable displacement system that can shut down half the cylinders, making it more efficient below 3000rpm.  After the W12 launches, an entry-level V8 will be added to the range. A V6 petrol-powered plug-in hybrid will complete the powertrain line-up. This, Bentley’s second hybrid, will follow the Bentayga Hybrid, which launches in August.  The Flying Spur pioneers all-wheel steering for Bentley, a system that is promised to enhance stability at high speeds and manoeuvrability around town. The rear wheels are steered in the opposite direction to the front wheels at low speeds, reducing the turning circle and making parking easier. At higher speeds, the rear wheels stay in the same direction as the front wheels, as a means of improving stability.  While the second-generation Flying Spur had all-wheel drive, the new model introduces an active system that favours rear-wheel drive to improve the car’s handling but will also send torque to the front axle automatically as needed. Bentley said the front end of the car feels “much lighter” as a result.  Other features already seen on the Continental include Bentley’s Dynamic Ride System, a 48V electric active roll control system and three-chamber air springs containing 60% more air volume than the previous single-chamber springs, resulting in a chassis set-up for all types of driving.  Torque distribution varies according to the drive setting. In Comfort and Bentley modes, up to 354lb ft is sent to the front axle. In Sport mode, torque to the front axle is limited to 206lb ft to achieve a more dynamic feel. The model also has a torque-vectoring-by-brake system.  The Flying Spur gets a longer wheelbase than its predecessor – the front wheels move forward by 130mm, creating a shorter overhang and more interior space – but its overall proportions are similar to the outgoing car’s.  While the outgoing model and the new Continental have a matrix grille, the new Flying Spur adds vanes to the grille “to make the car look more majestic”, said design director Stefan Sielaff, and to pay homage to WO Bentley’s 8 Litre model from 1930. The matrix remains behind the vanes for cooling purposes.  The Flying B mascot has been redesigned for Bentley’s centenary year. It is the marque’s first-ever electronically powered, retracting Flying B – the existing emblem on the Mulsanne is manually adjusted – and even gets illuminated wings. The headlights and ‘B’ graphic tail-lights have the same crystal-cut-effect LEDs as found on the Continental. Standard wheels are 21in, but 22in Mulliner rims – the biggest yet offered on a Flying Spur – are available.  Inside, the Flying Spur has the familiar double-wing theme in the front, and uses the well-received rotating display including the 12.3in touchscreen first launched on the Continental. The second side of the display has three customisable digital dials and the third side continues the wood veneer around the cabin.  There is a different central console to the Continental featuring two
Origin: New Bentley Flying Spur: 207mph luxury sports saloon on show at Goodwood

New Bentley Flying Spur: 207mph luxury sports saloon revealed

The third-generation Bentley Flying Spur will represent a “quantum leap in technology, performance and innovation” over its predecessor, according to the Crewe-based maker.  However, despite the Flying Spur and Continental’s identical underpinnings, including the MSB platform that is also shared with Porsche’s Panamera, Bentley has sought to differentiate the two cars not only through the difference in body shape but also a number of finer design details both inside and out.  The Flying Spur will launch with Bentley’s familiar range-topping twin-turbocharged W12 engine, reworked for this generation. The 6.0-litre unit produces 626bhp and 664lb ft of torque, accelerating the car from 0-60mph in 3.7sec, 0.7sec faster than its predecessor. The top speed is 207mph. It is mated to an eight-speed dual-clutch transmission promised to deliver “smooth and refined acceleration, quicker gearshifts and improved fuel economy”.  The engine combines high-pressure and low-pressure fuel injection, intended to maximise refinement, lower particulate emissions and optimise power and torque delivery. The new model reaches a peak torque of 664lb ft at 1350rpm, compared with the previous generation’s 590lb ft at 2000rpm. The unit also uses a variable displacement system that can shut down half the cylinders, making it more efficient below 3000rpm.  After the W12 launches, an entry-level V8 will be added to the range. A V6 petrol-powered plug-in hybrid will complete the powertrain line-up. This, Bentley’s second hybrid, will follow the Bentayga Hybrid, which launches in August.  The Flying Spur pioneers all-wheel steering for Bentley, a system that is promised to enhance stability at high speeds and manoeuvrability around town. The rear wheels are steered in the opposite direction to the front wheels at low speeds, reducing the turning circle and making parking easier. At higher speeds, the rear wheels stay in the same direction as the front wheels, as a means of improving stability.  While the second-generation Flying Spur had all-wheel drive, the new model introduces an active system that favours rear-wheel drive to improve the car’s handling but will also send torque to the front axle automatically as needed. Bentley said the front end of the car feels “much lighter” as a result.  Other features already seen on the Continental include Bentley’s Dynamic Ride System, a 48V electric active roll control system and three-chamber air springs containing 60% more air volume than the previous single-chamber springs, resulting in a chassis set-up for all types of driving.  Torque distribution varies according to the drive setting. In Comfort and Bentley modes, up to 354lb ft is sent to the front axle. In Sport mode, torque to the front axle is limited to 206lb ft to achieve a more dynamic feel. The model also has a torque-vectoring-by-brake system.  The Flying Spur gets a longer wheelbase than its predecessor – the front wheels move forward by 130mm, creating a shorter overhang and more interior space – but its overall proportions are similar to the outgoing car’s.  While the outgoing model and the new Continental have a matrix grille, the new Flying Spur adds veins to the grille “to make the car look more majestic”, said design director Stefan Sielaff, and to pay homage to WO Bentley’s 8 Litre model from 1930. The matrix remains behind the veins for cooling purposes.  The Flying B mascot has been redesigned for Bentley’s centenary year. It is the marque’s first-ever electronically powered, retracting Flying B – the existing emblem on the Mulsanne is manually adjusted – and even gets illuminated wings. The headlights and ‘B’ graphic tail-lights have the same crystal-cut-effect LEDs as found on the Continental. Standard wheels are 21in, but 22in Mulliner rims – the biggest yet offered on a Flying Spur – are available.  Inside, the Flying Spur has the familiar double-wing theme in the front, and uses the well-received rotating display including the 12.3in touchscreen first launched on the Continental. The second side of the display has three customisable digital dials and the third side continues the wood veneer around the cabin.  There is a different central console to the Continental featuring two air vents with optional diamond-cut edges sitting between a clock, wireless charging capability, USB ports and more compartments.  Sielaff said there is a “focus on both front and rear” as the Continental GT and Panamera share new model’s MSB platform car needs to appeal to both drivers and passengers. There is an option for darker front seats and lighter rear seats, and Sielaff added the rear has a “lounge-like feel”.  Bentley’s newly designed detachable, magnetic tablet enables rear passengers to control mood lights, media features, vehicle information, massage functionality and the deployment of the Flying B ornament.  The Flying Spur introduces all-new quilting in the door card, which features
Origin: New Bentley Flying Spur: 207mph luxury sports saloon revealed

Mercedes-Benz to launch EQE electric saloon in 2022

One of ex-Mercedes-Benz chairman Dieter Zetsche’s final acts in power was to sign off on the firm’s sixth electric model: the EQE.  The new upmarket saloon is scheduled to go on sale in 2022 and will compete directly with the Tesla Model S in terms of price. Details of the EQE have been cited in documents recently made public by the Chinese Ministry of Information and Technology in which the EQE is referred to under its internal codename, V295.  The EQE is one of 10 new electric models destined for sale from Mercedes under its EQ sub-brand by the end of 2025 in a development programme already budgeted to cost up to €10 billion (£8.7bn).  On top of this, the German car maker has announced the investment of a further €20bn (£17.4bn) in battery cell technology. Electric models are expected to account for more than a quarter of all Mercedes’ sales by the middle of the next decade.  Zetsche said: “Our electric offensive continues to gain momentum. We are now taking the next step.”  The EQE will follow the recently introduced EQC, next year’s new EQA and EQV, the flagship EQS and the recently confirmed EQB into Mercedes showrooms in the UK.  A sibling model to the larger and more luxurious EQS due out in 2021, the EQE will also be the second Mercedes to be based on the company’s new MEA electric car platform. Set to make extensive use of aluminium, it is designed to give future EQ electric models a flat floor structure for added packaging flexibility and what Mercedes insiders have described as “class-leading interior space”.  One source said: “The EQE will be shorter in length than today’s E-Class but offer space comparable to the existing S-Class.”  As our image shows, the EQE will evolve the shape of the upcoming facelifted E-Class with a focus on aerodynamic efficiency. It will adopt a face inspired by the rest of the EQ line-up, and is expected to sit lower to the ground with a ride height adjusting depending on the road conditions.  The EQC, EQA, EQV and EQB are based around existing platform structures that are shared with, respectively, the GLC, A-Class, V-Class and upcoming GLB.  Like the EQS, the EQE will be sold from the outset with four-wheel drive, with power coming from two electric motors – one mounted up front providing drive to the front wheels and a second driving the rear wheels.  To broaden the car’s appeal, Mercedes is also considering a rear-wheel-drive version of its new EQ model, although it is unlikely to be made available until 2022, according to sources familiar with the company’s electric car strategy.  Although it is still early days, power and torque are expected to eclipse the 402bhp and 564lb ft of the new EQC.  Among the features being touted for the EQE are active air suspension and four-wheel steering, as well as safety features incorporated into Mercedes’ new ESF experimental research vehicle, including level three autonomous driving functions.  Developments in battery cell technology are expected to provide the EQE with a range of close to 373 miles (600km).  Production of the EQE is scheduled to take place at Mercedes’ new Factory 56 in Germany – the same site earmarked to produce the EQS.  The EQE will also be produced at a new €1.5bn (£1.3bn) site being constructed by Mercedes in partnership with its Chinese joint-venture partner in Beijing at the rate of up to 70,000 units per year from
Origin: Mercedes-Benz to launch EQE electric saloon in 2022

Lotus considering GT, saloon, crossover and SUV projects

Lotus could build GTs, sports saloons, crossovers or SUVs in future, according to new boss Phil Popham – but only after it has re-established its credentials as a sports car firm. Earlier this year, Lotus revealed plans for an electric hypercar, codenamed Type 130, as well as indicating it was preparing to launch a new sports car ahead of renewing the Elise, Exige and Evora. The renewal of the sports car line is part of a five-year programme kick-started by Popham’s arrival following the company’s acquisition by Chinese giant Geely. However, Popham has also indicated the brand will expand outside its traditional models in time. “There’s a lot of talk about an SUV, but we haven’t confirmed that,” said Popham, speaking at the FT Future of the Car Summit. “We are rebuilding the business around sports cars and that’s the priority but we do believe that once that is done, this brand has the DNA and heritage to go further. “That could mean GTs, crossovers, SUVs, sporting saloons – or just about anything else. The plans are open and we’ll look at every potential area in a very detailed way, considering all areas.” Lotus has long been assessing its SUV plans, with Autocar previously revealing that the firm’s previous management started a project that would use elements of the SPA structure used by Geely and Volvo. Popham also outlined his view that electrification, connectivity and autonomy can be an opportunity for Lotus, despite its focus on driving dynamics. “In terms of autonomy, I see our cars having the capability, and our owners using that in the city before hitting the ‘Lotus’ button on a country road or track and taking control – perhaps assisted by that same technology to reach the absolute limits,” he said. “Electrification brings challenges and opportunities. In time, I don’t think people will notice the loss of the engine noise – for us, it’s about the car’s dynamics. Electric cars offer a low centre of gravity, because of where the batteries are placed, and the aerodynamics aren’t constrained by the mechanical parts.” Describing Lotus as a “70-year-old start-up”, Popham highlighted that despite its current investment – estimated to be in excess of £1.5 billion – and recruitment drive, it remained agile compared with rivals. He declined to declare projects for sales to justify the investment, but conceded Geely had targeted a long-term strategy. “Today we are a 1700 sales a year firm, and it’s clear we can’t be funded for the future by those sales,” he said. “We have to take a leap – we have to grow exponentially. Part of that will come from China, and Geely’s ownership can help with that, but we are looking to America and Europe with just as much
Origin: Lotus considering GT, saloon, crossover and SUV projects